GO
SEARCH:
What is a model number, and where do I find it?
Return to previous page

Washer Takes Too Long

The part(s) or condition(s) listed below for the symptom Washer takes too long are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Washer takes too long

For the most accurate results, enter your model number.


Cause 1Water supply valve turned off

Confirm that both the hot and cold water supply valves are fully open. If the valves are closed or partially open the washer won't fill or will take longer to start the wash cycle.

Cause 2Heating Element

Many washers use a heating element to raise the temperature of the water entering the tub. A defective element may cause the washer to take too long to clean its load. You can use a multimeter to test the heating element for electrical continuity. If the element tests negative for continuity, you'll know the heating element is faulty and will need to be replaced.

Parts
Cause 3Water Inlet Valve

The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires sufficient water pressure to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.

Parts
Return to previous page
Join our VIP email list for discounts and free money-saving tips:
Join