Heating Element Parts

Bake element assembly with support brackets

OEM Part - Manufacturer #W10779716

Dishwasher heating element kit. If the dishwasher isn't drying the dishes properly, the heating element may have burned out

OEM Part - Manufacturer #W10518394

The Frigidaire Bake Element is a high quality replacement part for electric ovens on ranges. It is located at the bottom of the oven and supplies heat for baking. It replaces several part numbers

OEM Part - Manufacturer #316075103

If the connector that attaches to the element is burnt or damaged then it should be replaced.

Dryer heating element assembly. If the dryer does not heat the thermal fuse should be checked before replacing the heating element. Normally, the element will have a break in the coil if defective.

OEM Part - Manufacturer #WP3387747

Heating Element

OEM Part - Manufacturer #W10703867

Dryer heating element. If the dryer no longer heats then the heating element may have failed, but it is not the most common cause. The most common cause for a dryer to stop heating is a blown thermal fuse.

OEM Part - Manufacturer #WP8544771

Oven bake heating element for lower oven. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.

OEM Part - Manufacturer #WP7406P428-60

Oven bake element. If the oven won't heat, the bake element may have burned out. Often, if the bake element has burned out, it will be visibly damaged. Inspect the bake element for holes or blisters.

OEM Part - Manufacturer #WPW10308477

8 Inch Surface Element, 5 Turn

OEM Part - Manufacturer #WP660533

The Whirlpool Bake Element is a high quality part located at the bottom of the oven that supplies heat for baking. It is 16-5/8 inches wide X 15-3/4 inches deep and is for electric ovens on ranges with a rating of 2600Watt and 240Volt. It replaces multiple part numbers. Use caution when servicing.

OEM Part - Manufacturer #WP308180

Dryer heating element assembly. If the dryer no longer heats then the heating element may have failed, but it is not the most common cause. The most common cause for a dryer to stop heating is a blown thermal fuse.

OEM Part - Manufacturer #DC97-14486A

Oven bake element with push-on terminal ends. It is not unusual for a bake element to short out and arc in one spot. If this occurs, disconnect the power to the stove until the element has been replaced.

OEM Part - Manufacturer #WP74010750

Heating element kit- 240v/5350w/60hz

OEM Part - Manufacturer #964P3