Payne Furnace Parts

Furnace draft inducer mounting grommet. This grommet helps isolate the blower assembly from the furnace to reduce noise.

OEM Part - Manufacturer #KA56GR560

Gas burner tube

OEM Part - Manufacturer #318172-701

Furnace draft inducer motor cooling fan blade and clip. You may have to cut the old clip off to remove the fan blade.

OEM Part - Manufacturer #LA660003

Furnace draft inducer motor with cooling fan. Be aware that the screw holes are not threaded—you will need to use self-tapping screws to install the motor.

OEM Part - Manufacturer #318984-753

To prevent carbon monoxide from leaking into your home, we recommend replacing the draft inducer gasket when servicing the motor or inducer fan. If you do not have a gasket, you can use high-temperature silicone sealant to seal the furnace.

Clip

OEM Part - Manufacturer #AS31XH280

Single, Oval, 370 Volts, 5 Microfarads

OEM Part - Manufacturer #P291-0504

Please note that the shape (Round/Oval-Flat) only matters for mounting purposes.

Furnace control board.

OEM Part - Manufacturer #325878-751

Gasket kit for draft inducer motor

OEM Part - Manufacturer #320887-751

Limit switch

OEM Part - Manufacturer #HH18HA416

Blower wheel for draft inducer motor 4" Diameter 1.5" Width

OEM Part - Manufacturer #LA11AA005

Furnace blower motor. This single-phase motor has the following specifications:

Horsepower: 1/3
Voltage: 115
Full-Load Amperage: 5.2
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 3.9”

OEM Part - Manufacturer #HC41AE117

Igniter replacement kit

OEM Part - Manufacturer #332505-751

Transformer, 120V-24V 40VA

OEM Part - Manufacturer #HT680054