Payne Furnace Parts

The 349336-761 Draft Inducer Motor is essential for enhancing the efficiency of your furnace's ventilation system. To prevent carbon monoxide from leaking into your home, we recommend replacing the draft inducer gasket or using high-temp silicone sealant when servicing the motor or inducer fan.

OEM Part - Manufacturer #349336-761

To prevent carbon monoxide from leaking into your home, we recommend replacing the draft inducer gasket when servicing the motor or inducer fan. If you do not have a gasket, you can use high-temperature silicone sealant to seal the furnace.

Flame rollout limit switch, re-settable. opens at 250f

OEM Part - Manufacturer #HH18HA452

Nitride Hot Surface Furnace Ignitor

OEM Part - Manufacturer #LH33ZG001

Flame rollout limit switch re-settable 350F

OEM Part - Manufacturer #HH18HA495

Furnace draft inducer mounting grommet. This grommet helps isolate the blower assembly from the furnace to reduce noise.

OEM Part - Manufacturer #KA56GR560

Limit switch non-resettable 101-200F

OEM Part - Manufacturer #HH18HA493

Carrier furnace igniter. The igniter gets very hot and glows bright orange to light the gas burner. If the igniter is cracked or defective, the furnace won’t heat.

OEM Part - Manufacturer #LH33ZS004

Furnace draft inducer motor with cooling fan. Be aware that the screw holes are not threaded—you will need to use self-tapping screws to install the motor.

OEM Part - Manufacturer #318984-753

To prevent carbon monoxide from leaking into your home, we recommend replacing the draft inducer gasket when servicing the motor or inducer fan. If you do not have a gasket, you can use high-temperature silicone sealant to seal the furnace.

Single run capacitor 440V 7.5 mfd

OEM Part - Manufacturer #P291-0754

Please note that the shape (Round/Oval-Flat) only matters for mounting purposes.

Gas burner tube

OEM Part - Manufacturer #318172-701

Grommet, sold individually

OEM Part - Manufacturer #KA56GR140

Furnace draft inducer motor cooling fan blade and clip. You may have to cut the old clip off to remove the fan blade.

OEM Part - Manufacturer #LA660003

Gas furnace flame sensor

OEM Part - Manufacturer #LH680013