Washer/Dryer Combo Parts

Idler pulley wheel and bearing assembly. The idler pulley puts tension on the drive belt. If the idler pulley fails to put the proper amount of tension on the belt, the dryer will not spin.

OEM Part - Manufacturer #WPY54414

Drum support roller

OEM Part - Manufacturer #D510708P

Dryer push to start switch

OEM Part - Manufacturer #WPW10420741

Agitator inner cap and seal. Helps keep water, fabric softener from going thru the agitator. Fabric softner dispenses from the holes in the agitator, just above the cap.

OEM Part - Manufacturer #WPW10074580

Drain hose with elbow bracket. Length 56 inches. Grey 90 coupler end ID is 1 inch

OEM Part - Manufacturer #W11281268

Spring for idler pulley arm in dryer

OEM Part - Manufacturer #WPW10446781

Leveling Leg

OEM Part - Manufacturer #W10888529

Lint filter

OEM Part - Manufacturer #D503980W

Valve to tub fill hose

OEM Part - Manufacturer #5304533220

Lid lock & switch assembly

OEM Part - Manufacturer #WH44X10288

Dryer front panel retainer clip. 1 clip per pack.

OEM Part - Manufacturer #W10854425

Dryer gas valve solenoid coil kit. The kit includes both 2 and 3 wire coils. If the dryer does not heat or heats intermittently the gas valve coils may be defective.

OEM Part - Manufacturer #5303931775

Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced

OEM Part - Manufacturer #134120900