Washer/Dryer Combo Fuse, Thermal Fuse & Breaker Parts

Whirlpool's replacement thermostat kit includes a thermal cut-off fuse, high-limit thermostat, and electrical connection hardware to ensure your clothes are perfectly dry. Keep up with laundry by installing this genuine Whirlpool replacement part.

OEM Part - Manufacturer #279816

Dryer high limit thermostat and thermal fuse kit. If the dryer does not heat the most common cause is a blown thermal fuse. Both the thermostat and fuse can be tested to determine if either is defective.352 F fuse. L146.1-44.4c thermostat.

OEM Part - Manufacturer #279973

Dryer thermal fuse (or thermal limiter). This fuse is located on the exhaust duct. If the dryer overheats, the thermal fuse opens to cut off power to the dryer. The thermal fuse cannot be reset--if the thermal fuse is open, it must be replaced.

OEM Part - Manufacturer #WP3390719

Heating element thermal cut-off (thermal fuse) 360 degrees and high-limit thermostat 250 degrees. The thermal fuse is a safety device designed to protect the dryer from overheating. A multimeter can be used to test the fuse. Always check the dryer venting when replacing a blown thermal fuse.

OEM Part - Manufacturer #279769

The fuse can be tested using a multimeter meter

Dryer thermal fuse. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset—if the fuse has blown, it must be replaced.

OEM Part - Manufacturer #D518649

Dryer thermal fuse and high limit thermostat kit for both gas and electric models. If the dryer does not heat then the thermal fuse may have blown and will need to be replaced.

OEM Part - Manufacturer #LA-1053

The thermal fuse often blows when the exhaust vent gets clogged with lint. The vent should be cleaned once a year especially if it is longer than 15 feet.

Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced

OEM Part - Manufacturer #134120900

Thermal cutoff

OEM Part - Manufacturer #WP8573713

Thermal Fuse (Non Resetable)

OEM Part - Manufacturer #137032600

Thermal Fuse

OEM Part - Manufacturer #D510702

This is a Genuine Replacement Part, The Model Number and Name for The Following Item: Whirlpool (WHIRA) 306604 Cutoff - T - Replacement.

OEM Part - Manufacturer #WP306604

To determine if your thermal fuse is defective, use a multimeter to test it for continuity.

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 33001762 Thermal Fuse.

OEM Part - Manufacturer #WP33001762

Use a multimeter to test your thermal fuse for continuity.

This is a genuine replacement part. The model number and name for the following item is: Whirlpool 3399849 Thermal Fuse.

OEM Part - Manufacturer #WP3399849