Tappan Parts

Oven temperature sensor *May require cutting and splicing wire connector from old sensor onto new sensor with porcelain wire nuts

OEM Part - Manufacturer #316233903

Furnace flame sensor with wire harness

OEM Part - Manufacturer #903600

Oven temperature sensor

OEM Part - Manufacturer #316217002

Flame sensor

OEM Part - Manufacturer #632484R

Oven sensor *Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.

OEM Part - Manufacturer #316490001

The 5303281135 radiant sensor is an OEM part for dryers that monitors the igniter's temperature to ignite gas and light the burner. It is compatible with various brands and requires installation with work gloves and unplugging the dryer.

OEM Part - Manufacturer #5303281135

Oven temperature sensor. This part may be different than your original. Instructions are included to help with the repair. See below for a brief set of instructions

OEM Part - Manufacturer #5304497424

These instructions only apply if the connector piece is different than your original.<br>Prior to cutting the leads, please check the length of the wire you need.<br>1. Cut the leads on your original sensor and the replacement sensor. Be sure to leave enough length to strip and splice the new probe and original connector together.<br>2. Strip the insulation, or wire cover, back approximately 1/4 inches on the new probe and original connector.<br>3. Twist the ends of your new probe and original connector together<br>4. Use a wire nut, or another high heat fastener to cover your exposed wires.<br>5. Install your new oven probe and re assembly your oven.

Thermocouple kit

OEM Part - Manufacturer #632183R

Thermistor, mc coil temp sensor

OEM Part - Manufacturer #624812R

Repl,thermistor sensor,o.d.temp

OEM Part - Manufacturer #624661R

Thermistor, sensor, ambient

OEM Part - Manufacturer #624780R

Repl, thermisor sensr, disch temp

OEM Part - Manufacturer #624662R

Thermistor, sensor, od, saturatio

OEM Part - Manufacturer #624781