Kenmore Igniter Parts

Bake or Broil Igniter. Match up the connector with old part. The plastic connector is male.

OEM Part - Manufacturer #W11596211

The Whirlpool Burner Igniter Kit 279311 is a high-quality replacement part that ignites gas to light the dryer burner. It replaces multiple igniters and requires safety precautions and disconnection from utilities before installation.

OEM Part - Manufacturer #279311

Consider replacing the gas valve coils while you have the dryer apart.

The GE Appliances Burner Igniter WB13K21 is a high-quality replacement part that ignites the gas to light the oven burner. It comes with 2 ceramic wire connectors and replaces multiple part numbers

OEM Part - Manufacturer #WB13K21

Oven igniter with long wire harness. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve.

OEM Part - Manufacturer #316489403

Oven igniter with wire harness

OEM Part - Manufacturer #5304509706

The Whirlpool Burner Igniter 12400035 is a high-quality replacement for most flat oven igniters. It does not replace round igniters or those with blue ceramic. It replaces multiple part numbers. Disconnect the appliance from all utilities prior to installation.

OEM Part - Manufacturer #12400035

Oven bake or broil igniter, 2.5 to 3.0 Amp. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve. (NOTE: This part is very fragile.)

OEM Part - Manufacturer #WB2X9154

Gas dryer igniter assembly with bracket and wire harness. If the dryer does not heat then the igniter may have burned out. The burned spot is normally visible. Be aware the igniter is very fragile.

OEM Part - Manufacturer #WE04X25996

Oven burner ignitor

OEM Part - Manufacturer #4342528

Gas dryer igniter with bracket and wire harness. This is a round spiral-style igniter. The igniter uses heat to ignite the gas in the burner assembly. If the igniter is defective, the gas will not ignite and the dryer will not heat.

OEM Part - Manufacturer #5318EL3001A

Oven bake burner igniter. If the oven does not heat check if the igniter is glowing. If so, it is likely weak and should be replaced. A defective igniter is the most common cause for a gas oven to not heat.

OEM Part - Manufacturer #316489400

Gas oven burner igniter

OEM Part - Manufacturer #5304506545

Igniter (Bracket is no longer included.) If your old igniter was round you will need to order the bracket in the related parts below.

OEM Part - Manufacturer #WP37001308