White Rodgers Igniter Parts

Hot Surface Ignitor With 5-1/4" Leads, N Style Mounting Block, Left Tab, Insulation 200°C, Electrical Connection, Molex Side Lock Connector with .092” Male Pins, Replaces R/S 41-408

Manufacturer #767A-372

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor with 5-1/4" Leads, NM Style Mounting Block, right tab, Insulation 200°C, Connector with Brackets, Includes Ceramic Wire Nuts. Replaces R/S 41-414

Manufacturer #767A-384

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor

Manufacturer #768A-815

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor With 5-1/2" Leads, A Style Mounting Block, Sealed Combustion, Insulation 200°C, Electrical Connection, Molex Internal Keyed Connector with .093" Male Pins, Includes Gasket, Replaces R/S 41-401

Manufacturer #767A-369

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor Mini With 7.5" (+/- 1") Leads Including Electrical Connector. Replaces R/S 41-603

Manufacturer #767A-379

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor With 5.25" Leads, 200° Insulation, Electrical Connection Receptacle with .093" Male Pins, Replaces R/S 41-405

Manufacturer #767A-361

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor With 5-1/4" Leads, M Style Mounting Block, Insulation 200°C, Electrical Connection, Receptacle with .093" Male Pins, Connector with Mounting Adaptor, Replaces R/S 41-404

Manufacturer #767A-382

If the electrical connector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Silicon Nitride 80V Hot Surface Ignitor, With White Teflon Coated Leads, Terminal Amp Receptacle With .084" Female Socket, Must Be Used With Hot Surface Ignition for Residential Furnaces (Silicon Nitride Replacement Only) Replaces Lennox 768A-4 (41K5601 & LB-109261A)

Manufacturer #768A-844S1

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Silicon Nitride 80V Hot Surface Ignitor, With White Teflon Coated Leads, 2 Terminal Amp Receptacle With .093 Female Socket, Must Be Used With Hot Surface Ignition for Residential Furnaces (Silicon Nitride Replacement Only) Replaces Amana 768A-2 (Amana/Goodman 11111701)

Manufacturer #768A-842S1

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Universal Nitride igniter upgrade kit

Manufacturer #21D64002

Includes Nitride Ignitor with 15.5" Leads One Universal” Mounting Bracket and Screw Mounting Adaptor Bracket 2 Ceramic Wire Nuts Updated Manufacturer Cross-Reference Nitride Upgrade Furnace Label Instruction Booklet

Hot Surface Ignitor with 1-3/8" leads, 270°C Mounting Block, Cylinder Base, Insulation 200°C, 1/4" Spade Terminals, Includes Ceramic Wire Nuts. Replaces R/S 41-413

Manufacturer #767A-375

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Silicon Nitride 80v Hot Surface Ignitor, With White Teflon Coated Leads, 2 Terminal Amp Receptacle With .084" Female Socket, Must Be Used With Hot Surface Ignition for Residential Furnaces (Silicon Nitride Replacement Only) , Replaces Thermo 768A-143 (380650)

Manufacturer #768A-843S1

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor With 5-1/4" Leads, N Style Mounting Block, Left Tab, Insulation 200°C, Electrical Connection, Molex Side Lock Connector with .092” Male Pins, Connector with Mounting Adaptor, Replaces R/S 41-411

Manufacturer #767A-383

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.