Payne Motor Parts (377 results)

Furnace draft inducer motor kit. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

OEM Part - Manufacturer #347822-763

To prevent carbon monoxide from leaking into your home, we recommend replacing the draft inducer gasket when servicing the motor or inducer fan. If you do not have a gasket, you can also use high-temperature silicone sealant to seal the furnace.

Furnace draft inducer motor with cooling fan. Be aware that the screw holes are not threaded—you will need to use self-tapping screws to install the motor.

OEM Part - Manufacturer #318984-753

To prevent carbon monoxide from leaking into your home, we recommend replacing the draft inducer gasket when servicing the motor or inducer fan. If you do not have a gasket, you can use high-temperature silicone sealant to seal the furnace.

Furnace draft inducer motor kit. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

OEM Part - Manufacturer #347822-761

To prevent carbon monoxide from leaking into your home, we recommend replacing the draft inducer gasket when servicing the motor or inducer fan. If you do not have a gasket, you can use high-temperature silicone sealant to seal the furnace.

Draft inducer motor

OEM Part - Manufacturer #HC21ZS123

Inducer assembly kit

OEM Part - Manufacturer #337938-785-CBP

Furnace blower motor. This single-phase motor has the following specifications:

Horsepower: 1/3
Voltage: 115
Full-Load Amperage: 5.2
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 3.9”

OEM Part - Manufacturer #HC41AE117

Condenser fan motor
This single-phase motor has the following specifications: 1/4 HP, 208-230V, 1.4 amps, 60 HZ, 1100 RPM, 1 speed, CCW, 48 frame, closed enclosure. ** Please see related motor if your old shaft/motor doesn't match design as pictured.**

OEM Part - Manufacturer #HC39GE237

Blower Motor - 1/3HP 115Volts 60Hz 4.8 amp 1075 RPM's 3 Speed Open Enclosure 48Y Frame Single Phase CCW 4.73" Shaft

OEM Part - Manufacturer #HB41TQ113

Inducer cooling fan kit

OEM Part - Manufacturer #LA660002

Furnace blower motor:

Horsepower: 3/4
Voltage: 115
Full-Load Amperage: 11
Hertz: 60
RPM: 1075
Speeds: 3
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 4"

OEM Part - Manufacturer #HC46TQ113

Condenser fan motor. This single-phase motor has the following specifications:

Horsepower: 1/10
Voltage: 208-230
Full-Load Amperage: 0.75
Hertz: 60
RPM: 1075
Rotation: Clockwise
Frame: 48
Enclosure: Closed
Shaft Length: 1.75”

OEM Part - Manufacturer #HC33GE233

Draft inducer fan motor, 115v 3000rpm

OEM Part - Manufacturer #HC21ZE121

To prevent carbon monoixde from leaking into your home we recommend replacing the draft inducer gasket when servicing the motor or inducer blower wheel. If you do not have a new gasket or it does not come with the replacmeent part you can use high temperature silicone sealant to prevent exhuast from leaking into your home .

Furnace main blower fan motor. 115 volt 1 phase 1/2 hp 1075 rpm 3 speed

OEM Part - Manufacturer #HC43TE113