Roper Dryer Parts

The drum support roller kit, 349241T. If the dryer is making a rumbling or knocking noise the rollers may be worn out causing the drum not to turn smoothly.

OEM Part - Manufacturer #349241T

The drum rollers and drum roller axles often wear out at the same time. If the drum roller axles are worn out, replace them along with the drum rollers.

Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.

OEM Part - Manufacturer #279834

Idler pulley for dryer drum drive belt

OEM Part - Manufacturer #WP691366

Consider replacing the Drive Belt while you have the dryer apart.

Dryer door catch kit

OEM Part - Manufacturer #279570

Dryer drum drive motor with pulley

OEM Part - Manufacturer #279827

The Whirlpool Burner Igniter Kit 279311 is a high-quality replacement part that ignites gas to light the dryer burner. It replaces multiple igniters and requires safety precautions and disconnection from utilities before installation.

OEM Part - Manufacturer #279311

Consider replacing the gas valve coils while you have the dryer apart.

Dryer tri-ring retainer for drum support rollers.

OEM Part - Manufacturer #WPW10512946

White Touch Up Paint

OEM Part - Manufacturer #72017

Lint filter with cover

OEM Part - Manufacturer #W10828351

If the lint filter cover is damaged or cracked, it should be replaced.

Door Catch

OEM Part - Manufacturer #WP3389441

Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.

OEM Part - Manufacturer #WP338906

Shaft for drum support roller, left side

OEM Part - Manufacturer #WPW10359270

Lint screen housing foam seal

OEM Part - Manufacturer #WP339956