Packaged Unit/RTU Igniter Parts

Hot Surface Ignitor with 4-1/2" Leads, G Style Mounting Block, Insulation 200°C, Amp Terminal Connector, Includes Ceramic Wire Nuts. Replaces R/S 41-407

Manufacturer #767A-376

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor With 5.25" Leads, 200° Insulation, Electrical Connection Receptacle with .093" Male Pins

Manufacturer #767A-357

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor with 4-1/2" Leads, N Style Mounting Block, Insulation 200°C, Amp Terminal Connector, Includes Ceramic Wire Nuts. Replaces R/S 41-410

Manufacturer #767A-377

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor With 5.313" Leads, 200° Insulation, Electrical Connection, AMP 1-480699-0, Receptacle with .093" Male Pins

Manufacturer #767A-366

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor Mini With 7.5" (+/- 1") Leads Including Electrical Connector. Includes Ceramic Wire Nuts & Mounting Adaptors. Replaces R/S 41-605

Manufacturer #767A-381

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor With 6" Leads, 200° Insulation, Electrical Connection Receptacle with .093" Male Pins

Manufacturer #767A-356

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor With 5.688" Leads, 200° Insulation, Electrical Connection 1/4" Female Spade Terminals

Manufacturer #767A-365

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor with 11" leads, Y Style Mounting Block, Oblong Base, Insulation 200°C, Stripped Ends, Includes Ceramic Wire Nuts, Includes Gasket. Replaces R/S 41-406

Manufacturer #767A-374

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot surface igniter

OEM Part - Manufacturer #SFIGN-410

Igniter kit

OEM Part - Manufacturer #KIT03033USA

Furnace igniter kit

Aftermarket (Non-OEM) Part - Manufacturer #IG401

Suggested replacement is s1-32541021000

OEM Part - Manufacturer #S1-02541021000

Ignitor

OEM Part - Manufacturer #LH33WZ006