Carrier Furnace Parts

Flame rollout limit switch re-settable 350F

OEM Part - Manufacturer #HH18HA495

Limit switch non-resettable 101-200F

OEM Part - Manufacturer #HH18HA493

Furnace draft inducer motor cooling fan blade and clip. You may have to cut the old clip off to remove the fan blade.

OEM Part - Manufacturer #LA660003

Inducer fan wheel

OEM Part - Manufacturer #LA11XA048

Draft inducer motor

OEM Part - Manufacturer #HC21ZS123

Grommet, sold individually

OEM Part - Manufacturer #KA56GR140

Furnace blower wheel. 12" X 11.93" 1/2" Bore. The blower wheel blows air out of the furnace and through the house. The blower wheel is attached to the blower motor shaft with a set screw. If the set screw is loose, the blower wheel will wobble on the motor shaft and be noisy as it turns.

OEM Part - Manufacturer #LA22ZA120

Pressure switch

OEM Part - Manufacturer #HK06WC069

Furnace draft inducer motor kit. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

OEM Part - Manufacturer #349336-763

To prevent carbon monoxide from leaking into your home, we recommend replacing the draft inducer gasket when servicing the motor or inducer fan. If you do not have a gasket, you can also use high-temperature silicone sealant to seal the furnace.

Furnace blower motor:

Horsepower: 3/4
Voltage: 115
Full-Load Amperage: 11
Hertz: 60
RPM: 1075
Speeds: 3
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 4"

OEM Part - Manufacturer #HC46TQ113

Sight Glass

OEM Part - Manufacturer #323018-202

Spray Paint

OEM Part - Manufacturer #313974-751

Door Screw Retainer

OEM Part - Manufacturer #AS88PD005