York Furnace Motor Parts

Furnace blower motor. This single-phase motor has the following specifications:

Horsepower: 1/2
Voltage: 115
Full-Load Amperage: 10.7
Hertz: 60
RPM: 1175
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open

OEM Part - Manufacturer #S1-02440901000

Draft inducer blower assembly. 60 Hz 1.75 Amps, 3000 RPM

OEM Part - Manufacturer #S1-02435329000

Induced-blower motor

OEM Part - Manufacturer #S1-32649692000

Furnace blower motor. This single-phase motor has the following specifications:

Horsepower: 1
Voltage: 115
Full-Load Amperage: 14.4
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 3"

OEM Part - Manufacturer #S1-02440900000

Combustion blower, 800-100 BTU

OEM Part - Manufacturer #S1-02649695000

To prevent carbon monoixde from leaking into your home we recommend replacing the draft inducer gasket when servicing the motor or inducer blower wheel. If you do not have a new gasket or it does not come with the replacmeent part you can use high temperature silicone sealant to prevent exhuast from leaking into your home .

3/4HP 115Volts 60Hz 11 amp 1060 RPM's 3 Speed Open Enclosure 48Y Frame Single Phase CCW 3.5" Shaft

OEM Part - Manufacturer #S1-02440902000

Furnace blower assembly with limit and gasket.

To prevent carbon monoxide from leaking into your home, we recommend replacing the draft inducer gasket when servicing the motor or inducer fan. If you do not have a gasket, you can use high-temperature silicone sealant to seal the furnace.

OEM Part - Manufacturer #S1-32434558000

If you do not have a gasket, you can use high-temperature silicone sealant to seal the furnace.

Furnace draft inducer motor assembly. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

OEM Part - Manufacturer #S1-37320717001

To prevent carbon monoxide from leaking into your home, we recommend replacing the draft inducer gasket when servicing the motor or inducer fan. Alternatively, if you do not have a gasket, you can use high-temperature silicone sealant in place of the gasket.

Vent blower with motor

OEM Part - Manufacturer #S1-2702-321P

Furnace blower motor. This single-phase motor has the following specifications:

Horsepower: 1/3
Voltage: 115
Full-Load Amperage: 6.2
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise LE
Frame: 48
Enclosure: Open
Shaft Length: 4”

OEM Part - Manufacturer #S1-02440904000

1HP 115Volts 60Hz 10.3 amp 1100 RPM's 4 Speed Open Enclosure 48Y Frame Single Phase CCW Dual 5 X 5" Shaft

OEM Part - Manufacturer #S1-02442184000

Draft inducer fan motor

OEM Part - Manufacturer #S1-37310337702

To prevent carbon monoxide from leaking into your home, we recommend replacing the draft inducer gasket when servicing the motor or inducer fan. If you do not have a gasket, you can use high-temperature silicone sealant to seal the furnace.

One speed draft inducer fan motor assembly

OEM Part - Manufacturer #S1-02435330000