Kenmore Washer/Dryer Combo Parts

Dryer drum drive belt, 93 1/2 inches long, 4 ribs 3 grooves. The drive belt is a very long, slender belt that wraps all the way around the dryer drum, around a tension pulley, and then around the drive motor pulley. If the drum will not turn when the dryer is turned on the belt is likely broken.

OEM Part - Manufacturer #661570V

Dryer drum belt, length 88.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has broken.

OEM Part - Manufacturer #134503600

Consider replacing the bearing while the dryer is apart.

Dryer door catch kit

OEM Part - Manufacturer #279570

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

OEM Part - Manufacturer #5303281153

Dryer idler pulley wheel kit. The idler pulley puts tension on the drive belt. If the idler pulley fails to put the proper amount of tension on the belt, the dryer will not spin

OEM Part - Manufacturer #279640

The dryer belt wears out over time. Consider replacing the belt while the dryer is apart.

White Touch Up Paint

OEM Part - Manufacturer #72017

Dryer tri-ring retainer for drum support rollers.

OEM Part - Manufacturer #WPW10512946

Drive motor kit

OEM Part - Manufacturer #279787

Screw

OEM Part - Manufacturer #WP308685

Washer drive belt. If this belt is broken, the washer will not spin or agitate.

OEM Part - Manufacturer #134511600

The tension pulley may also be worn.

Dryer lint trap. Proper air flow is critical to dryer operation so the filter should be cleaned before every load. Replace the filter if it has any tears or rips in it.

OEM Part - Manufacturer #5304516871

Door catch kit

OEM Part - Manufacturer #5366021400

Dryer door/washer lid switch kit. Comes with dryer mounting bracket, (2) wire terminals and (2) mounting screws.

OEM Part - Manufacturer #W10820036