- 1-877-650-2121
- My Orders
- Cart 0 item(s)
Refine Selection Here:
This part fits your Washer/Dryer Combo
Dryer drum drive belt. This belt is approximately 1/4" wide x 92-1/4" long. It is belt is flat on one side and has 4 ribs and 3 grooves on the other. It replaces many other belts, including some with 5 ribs and 4 grooves. The belt attaches to the motor pulley and spins the drum as the motor rotates
OEM Part - Manufacturer #341241
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
The drum support roller kit, 349241T. If the dryer is making a rumbling or knocking noise the rollers may be worn out causing the drum not to turn smoothly.
OEM Part - Manufacturer #349241T
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off without the gas igniting, it usually means one of these coils is bad.
OEM Part - Manufacturer #279834
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
Idler pulley for dryer drum drive belt
OEM Part - Manufacturer #WP691366
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
Dryer door catch kit
OEM Part - Manufacturer #279570
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
Dryer drum drive motor with pulley
OEM Part - Manufacturer #279827
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
The Whirlpool Burner Igniter Kit 279311 is a high-quality replacement part that ignites gas to light the dryer burner. It replaces multiple igniters and requires safety precautions and disconnection from utilities before installation.
OEM Part - Manufacturer #279311
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
Dryer blower wheel. Used on 29 inch Whirlpool built models with lint filter on top. To remove the blower wheel, unscrew the blower wheel clockwise off the motor shaft.
OEM Part - Manufacturer #WP694089
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
Dryer tri-ring retainer for drum support rollers.
OEM Part - Manufacturer #WPW10512946
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
Dryer thermal fuse (or thermal limiter). This fuse is located on the exhaust duct. If the dryer overheats, the thermal fuse opens to cut off power to the dryer. The thermal fuse cannot be reset--if the thermal fuse is open, it must be replaced.
OEM Part - Manufacturer #WP3390719
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
This is a genuine replacement part. The model number and name for the following item is: Whirlpool 349639 Lint Screen.
OEM Part - Manufacturer #WP349639
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
Ring bearing kit, front of dryer drum
OEM Part - Manufacturer #279441
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
Door seal
OEM Part - Manufacturer #W10906683
Required with this product:
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check for continuity with a multi-meter before replacing.
OEM Part - Manufacturer #WP338906
Order now and this item will ship out Monday
This part fits your Washer/Dryer Combo
Screw
OEM Part - Manufacturer #WP308685
Order now and this item will ship out Monday
