Range/Stove/Oven Igniter Parts

Oven bake burner igniter. If the oven does not heat check if the igniter is glowing. If so, it is likely weak and should be replaced. A defective igniter is the most common cause for a gas oven to not heat.

OEM Part - Manufacturer #316489400

Gas oven burner igniter

OEM Part - Manufacturer #5304506545

Oven Bake/Broil igniter. Horizontal mount with wire connector. If the oven does not heat check if the igniter is glowing, if so then there is a good chance the igniter is weak and will need replacement.

OEM Part - Manufacturer #WP7432P136-60

Oven burner igniter

OEM Part - Manufacturer #WB13X25500

Oven igniter. The igniter draws electrical current through the oven safety valve to open it. If the igniter glows for more than 90 seconds without igniting the gas flame, this indicates that the igniter is too weak to open the valve.

OEM Part - Manufacturer #1802A344

Bake igniter

OEM Part - Manufacturer #139013700

Oven igniter

OEM Part - Manufacturer #WB13X25262

Gas oven igniter with female plug end

OEM Part - Manufacturer #WPW10324738

Oven igniter, *Note: The wires will need to be spliced to add the terminal ends.

OEM Part - Manufacturer #1802A345

The GE Appliances Burner Igniter WB2X9998 is a high-quality replacement part that ignites the gas to light the oven burner. It has a 3.72 inches length and replaces multiple part numbers. Disconnect the appliance from all utilities prior to installation.

OEM Part - Manufacturer #WB2X9998

The wires to the oven igniter will likely need to be cut and the insulation stripped back to expose them. The wires can now be connected with high temperature porcelain wire nuts.

The Whirlpool Bake Igniter is a high-quality replacement part for gas ovens on ranges. It ignites the bake burner and replaces several part numbers. Safety precautions should be taken and a trained professional may be required for some repairs. Consult the owner's manual for instructions.

OEM Part - Manufacturer #WP31940001

The Genuine OEM GE Appliances Bake Burner Igniter Kit provides heat for the oven. Compatible with various models. The connector may need to be cut off and wires spliced to range wiring with porcelain wire nuts. It is recommended to disconnect the appliance from all utilities prior to installation.

OEM Part - Manufacturer #WB16K10035

Electrodes & harness hv

OEM Part - Manufacturer #WB18K10098