GO
SEARCH:

Dacor Gas Stove Burner Won't Light

The part(s) or condition(s) listed below for the symptom Gas stove burner won't light are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Gas stove burner won't light

For the most accurate results, enter your model number.


Cause 1Burner cap not on correctly

If the burner cap is misaligned on the burner base the igniter may not spark properly, and the burner flame will be uneven. Confirm the appliance is turned off and the stovetop is cool to the touch, then readjust the burner cap, if necessary, so it is seated properly on the burner base.

Cause 2Spark Module

The spark modules provides power to each surface burner spark electrode. If the burner is produces a weak spark, or if the burner sparks intermittently, the spark module might be defective. Before replacing the spark module, first check the spark electrode and the spark wire. If the spark electrode and spark wire are not at fault, the spark module is likely defective. If the spark module is defective, replace it.

Parts
Cause 3Incoming Power Problem

The electrical outlet may not be getting power. To determine if the outlet is getting power, try plugging something else into the outlet. If the outlet is not getting power, check the home circuit breakers or fuses.

Cause 4Spark Ignition Switch

When the burner is turned on, the spark ignition switch sends voltage to the spark module to produce a spark. If the spark ignition switch is defective, it won't send voltage to the spark module, and the burner won't be able to produce a spark. If your range's burner isn't sparking, check to see if the other burners are sparking properly. If the other burners are sparking properly, the spark ignition switch is likely defective.

Parts
Cause 5Spark Ignition Switch and Harness

When the burner is turned on, the spark ignition switch sends voltage to the spark module to produce a spark. If the spark ignition switch is defective, it won't send voltage to the spark module, and the burner won't be able to produce a spark. If your range's burner isn't sparking, check to see if the other burners are sparking properly. If the other burners are sparking properly, the spark ignition switch is likely defective. If the spark ignition switch is not sold separately, you will have to purchase the switch and harness assembly.

Parts
Cause 6Spark Electrode

The spark electrode sends a spark to ignite the gas in the burner assembly. If the spark electrode is defective or worn out, it might not produce a spark, or the spark might be too weak to ignite the gas. As a result, the spark electrode will make a clicking sound when the burner is turned on, but the burner won't light. If the spark electrode is defective, replace it.

Parts
Cause 7Surface Burner Valve

A stove burner that won't light could be caused by a faulty surface burner valve. If you don't hear the gas beginning to flow when you turn on the valve, the valve is likely defective and will need to be replaced.

Parts
Cause 8Control Board

Control Board

Parts
Cause 9Surface Burner Base

A stove burner that won't light could be caused by a misaligned or corroded surface burner base. The base holds the orifice holder and electrode in place to allow ignition. Inspect the base for any damage or corrosion and replace the component if necessary.

Parts
Cause 10Surface Burner Orifice Holder

A stove burner that won't light could be caused by a bent or damaged surface burner orifice holder not allowing the gas to be ignited by the electrode. Inspect the holder to see if it's misaligned and replace with a new one as required.

Parts
Cause 11Surface Burner Cap

Surface Burner Cap

Parts