Leaf Blower Carburetor Parts

Small engine primer bulb. The primer bulb draws additional fuel into the carburetor to help start the engine.

Manufacturer #188-512-1

Walbro primer bulb. The primer bulb draws additional fuel into the carburetor to make the engine easier to start. If the primer bulb is leaking, replace it.

Manufacturer #188-12-1

Zama primer bulb, red. The primer bulb draws additional fuel into the carburetor to make the engine easier to start. If the primer bulb is leaking, replace it.

Manufacturer #0057025

Carburetor for 2-cycle engine. If the carburetor is clogged, the engine won't get enough fuel. As a result, the engine may not start or may run rough.

Genuine OEM Part - Manufacturer #753-06288

Primer bulb (or purge bulb) assembly. The primer bulb draws fuel into the carburetor to make the engine easier to start. The short port on the primer bulb is the inlet. The longer port is the outlet back to the fuel tank.

Genuine OEM Part - Manufacturer #530047721

Zama carburetor rebuild/repair kit. If the carburetor is clogged, the engine won't get enough fuel. As a result, the engine may not start or may run rough. It is often possible to repair the carburetor if it is clogged.

Manufacturer #RB-71

Prior to rebuilding the carburetor, we recommend that you clean the carburetor's jets with carburetor cleaner.

Two cycle engine carburetor. If the engine runs rough, the carburetor may be restricted. The carburetor can often be cleaned or rebuilt, but sometimes it may need to be replaced.

Genuine OEM Part - Manufacturer #753-06190

Small engine carburetor gasket and diaphragm kit. If the engine runs rough, then the carburetor may need to be cleaned, rebuilt, or replaced.

Manufacturer #D10-WAT

Genuine Briggs & Stratton 495606 Carburetor Rebuild Kit. If the engine is running poorly then the carburetor may be restricted and need to be cleaned and some of the internal seals and diaphragm replaced.

Genuine OEM Part - Manufacturer #495606

Pump-priming

Genuine OEM Part - Manufacturer #49043-2067

Carb kit

Aftermarket (Non-OEM) Part - Manufacturer #49-288

Carburetor needle & seat kit. Comes with installation instructions. The float needle allows fuel to enter the float bowl. If the float needle is stuck closed, the engine will not get fuel and thus will not start.

Genuine OEM Part - Manufacturer #398188

When replacing the carburetor needle & seat, we recommend cleaning the fuel system and replacing the fuel filter.

Fuel float kit for carburetor

Genuine OEM Part - Manufacturer #398187