Back
Back
Keep typing for more specific results...

Toro Engine Parts

Toro Appliance Parts

YOUR TRUSTED CHOICE

  • Genuine Brand Name Parts
  • Fast Delivery
  • Expert Customer Support

Popular Toro Engine Parts

Armature-magneto – Part Number: 591459
$49.60
Special Order
Armature-magneto
Part #: HD9045176
Manufacturer Part #: 591459
It is an authentic amature-magneto (ignition coil) which was specially designed for use with Briggs and Stratton engines used on lawn and garden equipment. The purpose of this item is to deliver electric current for the ignition system. It produces pulses of high voltage which then are sent to the spark plugs. It is mainly made out of metal and it is sold individually. Please note a spark plug boot is sold separately. Please note replacing this module would differ based on your unit, however the basic steps would be the same. To complete this repair you would need screwdriver set. • Remove the housing/covers from the unit • Remove the spark plug • Bind the cylinder • Remove the air filter cover and side cover • Remove the throttle cable from the carburetor • Disconnect the wires • Remove old ignition coil • Install new ignition coil • Install the red wire • Set the gap • Install the black wire • Reassembly and test the unit
Fixes these symptoms
  • Will Not Start
Nut-flange, Ni – Part Number: 104-8301
$6.07
In Stock
Nut-flange, Ni
Part #: HD8827741
Manufacturer Part #: 104-8301
This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this high-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.
Air Filter And Prefilter Kit – Part Number: 119-1909
$25.25
In Stock
Air Filter And Prefilter Kit
Part #: HD8848656
Manufacturer Part #: 119-1909
This is an authentic replacement air filter and prefilter kit which is supplied by the original equipment manufacturer for use with Toro lawn and garden equipment. Its purpose is to filter out dust and debris from contaminating the carburetor and the engine, over time filters will get dirty and clogged eventually requiring replacement to ensure the proper air flow. This kit includes one high-quality pleated paper filter and one foam pre-filter.
Nut-lock, Ni – Part Number: 3296-56
$6.53
In Stock
Nut-lock, Ni
Part #: HD8953375
Manufacturer Part #: 3296-56
This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.
Washer-flat – Part Number: 3256-3
$5.95
In Stock
Washer-flat
Part #: HD8951750
Manufacturer Part #: 3256-3
This replacement flat washer is sourced directly from the original equipment manufacturer, it is specially designed for use with Toro riding lawn and garden equipment. It helps to distribute the pressure evenly between connected parts to ensure a tight fit, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.
Gasket-exhaust – Part Number: 690970
$5.95
Special Order
Gasket-exhaust
Part #: HD9063564
Manufacturer Part #: 690970
This is a genuine OEM sourced replacement exhaust gasket. It is specially made for use with Briggs and Stratton engines commonly used on Toro lawn and garden equipment. Its purpose is to provide an air-tight seal between the carburetor and the exhaust tube. Over time this gasket will deteriorate requiring replacement. Please note, this composite gasket is sold individually. To replace this part you will need a wrench.
Spark Plug – Part Number: 121-4199
$13.62
In Stock
Spark Plug
Part #: HD11804527
Manufacturer Part #: 121-4199
This replacement spark plug is specially manufactured for use with small engines that are commonly installed on a variety of lawn and garden equipment. It is sourced directly from original equipment manufacturer and it is sold individually. Spark plugs are used to deliver the electric current from an ignition system to an internal combustion engine. Over time spark plugs will get dirty or fouled requiring replacement. You should gap your spark plug according to the owners manual of the outdoor product you have. You would need a spark plug wrench or a socket wrench to replace this spark plug.
Nut-flange, Ni – Part Number: 104-8300
$6.28
In Stock
Nut-flange, Ni
Part #: HD8827448
Manufacturer Part #: 104-8300
It is an identical replacement for the original hardware that was installed on a new equipment. The nut-flange is a standard component which may have multiple applications. Check the owner's manual and the parts diagrams for your specific model to ensure the correct replacement procedure. This high-quality nut-flange is made of durable metal and is sold as an individual item. It is supplied by the original manufacturer for Toro and Lawn Boy equipment. Note, a wrench will be needed to secure or remove it.
Nut-hhf, Whiz – Part Number: 3290-357
$6.05
In Stock
Nut-hhf, Whiz
Part #: HD8955522
Manufacturer Part #: 3290-357
Hose-vacuum – Part Number: 791766
$8.95
Special Order
Hose-vacuum
(1)
Part #: HD9306672
Manufacturer Part #: 791766
This genuine part is sourced directly from the original equipment manufacturer. It is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. The purpose of this hose is to transfer vacuum from the engine. Unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. Note, this item includes one durable rubber hose and two metal clamps to secure it.