GO
SEARCH:

Samsung Microwave Door Won't Open

The part(s) or condition(s) listed below for the symptom Microwave door won't open are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Microwave door won't open

For the most accurate results, enter your model number.


Cause 1Open Lever

Inspect the open lever for damage. If the open lever is broken or damaged, replace it.

Parts
Cause 2Door Spring

Inspect the door spring for damage. If the door spring is broken, replace it.

Parts
Cause 3Door Latch

Inspect the door latch for damage. If the door latch is broken, replace it.

Parts
Cause 4Door Assembly

A microwave door not opening is often caused by a bent or damaged door hook or latch or a broken door spring. For some models, these components can not be replaced separately and you will need to install a new door assembly to fix the problem.

Parts
Cause 5Switch Holder

The microwave switch holder is the component that houses the door switches behind the control panel. If the switch holder is damaged or misaligned, the door may have trouble opening. You will need to uninstall the control panel and inspect the switch holder to confirm it is in good condition and secured properly. Replace the switch holder with a new one if necessary.

Parts
Cause 6Door Hook

The door hook engages with the door latch to keep the door closed during operation. Since the door hook is made of plastic, it can break due to regular wear. If the door hook is broken, it won’t release the door properly, preventing the door from opening. If the door hook is broken, replace it.

Parts
Cause 7Button Spring

The button spring is located on the inside of the door open button. If the spring is broken, replace it.

Parts
Cause 8Button

The door open button might have a broken internal component. If the button is broken, replace the button.

Parts
Cause 9Handle Actuator

The handle actuator is connected between the door open button and the door latch assembly. Since the handle actuator is made of plastic, it can break from normal wear. If the handle actuator is broken, replace it.

Parts
Cause 10Control Board

Control Board

Parts
Cause 11Spring

Inspect the door spring or button spring for damage and replace if necessary.

Parts
Cause 12Door

Door

Parts