GO
SEARCH:

E-Wave Microwave Buttons Not Working

The part(s) or condition(s) listed below for the symptom Microwave buttons not working are ordered from most likely to least likely to occur. Check or test each item, starting with the items at the top of the page.

Most Frequent Causes for Microwave buttons not working

For the most accurate results, enter your model number.


Cause 1Touchpad and Control Panel

To determine if the touchpad and control panel are defective, try pressing each of the buttons on the control panel. If some of the buttons respond correctly while others don’t, replace the touchpad and control panel.

Parts
Cause 2Touchpad

To determine if the touchpad is defective, try pressing each of the buttons on the control panel. If some of the buttons respond correctly while others don’t, replace the touchpad.

Parts
Cause 3User Control and Display Board

To determine if the control and display board is defective, try pressing each of the buttons on the control panel. If none of the buttons are responding correctly, replace the user control and display board.

Parts
Cause 4Main Control Board

To determine if the control and display board is defective, try pressing each of the buttons on the control panel. If none of the buttons are responding correctly, it is possible that the main control is defective.

Parts
Cause 5Control Board

To determine if the control board is defective, try pressing each of the buttons on the control panel. If none of the buttons are responding correctly, it is possible that the control board is defective.

Parts
Cause 6Reset control board

If the control buttons won't work first try resetting the control board. This can be done by unplugging the microwave for about 10 seconds and plugging it back in.

Cause 7Door Switch

If none of the microwave buttons are working, you should use a multimeter to test the door switches for electrical continuity. If one of more of the switches test negative for continuity, the switch or switches should be replaced.

Parts
Cause 8Micro Switch

If none of the microwave buttons are working, you should use a multimeter to test the door switches (micro switches) for electrical continuity. If one of more of the switches test negative for continuity, the switch or switches should be replaced.

Parts