Crosley Range/Stove/Oven Parts

8 Inch Surface Element, 5 Turn

OEM Part - Manufacturer #WP660533

Oven bake element with push-on terminal ends. It is not unusual for a bake element to short out and arc in one spot. If this occurs, disconnect the power to the stove until the element has been replaced.

OEM Part - Manufacturer #WP74010750

8 Inch electric coil surface element with looped terminals, 2600 watts. 5 turns

OEM Part - Manufacturer #316442301

The element receptacle (or terminal block) wears out over time. If the surface element is defective, you may want to replace both the surface element and the receptacle.

Stove top coil surface heating element, 8 inch. If the element does not heat either it or the control switch is defective. The coil can be tested to determine if it is at fault.

OEM Part - Manufacturer #316442300

If the element operates intermittently we recommend replacing both the element and it's receptacle.

Surface coil element replacement kit, 2 eight inch elements, 2 six inch elements, four receptacles and related hardware. If the terminal blocks and surface elements on your stove top are in bad shape this is the perfect kit to refresh the appliance.

OEM Part - Manufacturer #4392061

The Whirlpool Coil Surface Element is a high-quality, 6-inch, 1500-watt plug-in style element that supplies heat to a cooking area on top of an electric range. It has 4 turns and looped terminal ends. Disconnect the appliance from all utilities prior to installation.

OEM Part - Manufacturer #WP660532

Dual radiant surface element, 9 inches/6 inches, 3000 watts

OEM Part - Manufacturer #5304533520

Oven bake element. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.

OEM Part - Manufacturer #318255006

Range/stove surface element (6-inch). If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.

OEM Part - Manufacturer #318372210

If the heating element operates intermittently, the element receptacle may be defective.

6-inch electric coil surface element with looped terminals, 1250 watt, 4 turn. If the surface element does not have continuity (an unbroken electrical circuit), the surface element won't heat.

OEM Part - Manufacturer #318372211

To determine if the surface element is defective, use a multimeter to test it for continuity.

Oven bake element. It is not unusual for a heating element to short in one spot and arc. When this occurs the power should be shut off to oven and the not restored until after the element is replaced.

OEM Part - Manufacturer #WPY04000066

Bake Element

OEM Part - Manufacturer #WP74003019

Oven bake element. If the oven won't heat, the bake element may have burned out. If the bake element has burned out, it will often be visibly damaged. Inspect the bake element for holes or blisters.

OEM Part - Manufacturer #316225001