Dryer Parts

Dryer blower wheel. Used on 29 inch Whirlpool built models with lint filter on top. To remove the blower wheel, unscrew the blower wheel clockwise off the motor shaft.

OEM Part - Manufacturer #WP694089

Lint Filter with Frame

OEM Part - Manufacturer #WE03X23881

Dryness sensor bar

OEM Part - Manufacturer #WP3387223

Dryer drum support roller

OEM Part - Manufacturer #WP37001042

Idler pulley and bracket for dryer drum belt

OEM Part - Manufacturer #DC93-00634A

High-limit thermostat kit. Contains hi limit thermostat and thermal cut out fuse. If the dryer overheats, the high-limit thermostat cuts off power to the dryer. If the dryer won't heat, the high-limit thermostat may have blown. This part has been updated by the manufacturer and may look different.

OEM Part - Manufacturer #W11050897

Dryer idler pulley wheel kit. The idler pulley puts tension on the drive belt. If the idler pulley fails to put the proper amount of tension on the belt, the dryer will not spin

OEM Part - Manufacturer #279640

The dryer belt wears out over time. Consider replacing the belt while the dryer is apart.

Idler pulley wheel and bearing. If the idler pulley wheel and/or bearing is defective, it may cause the dryer to be excessively noisy.

OEM Part - Manufacturer #WP6-3700340

Lid lock latch assembly. The part might arrive in the locked position. Per the manufacturer install the lid lock & power up washing machine to reset lock to the open position.

OEM Part - Manufacturer #W11307244

Snap retaining ring

OEM Part - Manufacturer #WP9703438

Dryer lint filter. Some models have a updated housing. If you need a filter without the notches on top please see related item #4960837.

OEM Part - Manufacturer #ADQ56656401

If your lint filter pops up, doesn't fit properly, or is catching on clothes, replace the filter cover and filter guide.

White Touch Up Paint

OEM Part - Manufacturer #72017

Dryer tri-ring retainer for drum support rollers.

OEM Part - Manufacturer #WPW10512946