White Rodgers Furnace Parts

Silicon Nitride 80V Hot Surface Ignitor, With White Teflon Coated Leads, 2 Terminal Amp Receptacle With .093 Female Socket, Must Be Used With Hot Surface Ignition for Residential Furnaces (Silicon Nitride Replacement Only) Replaces Amana 768A-2 (Amana/Goodman 11111701)

Manufacturer #768A-842S1

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Universal Gas Valve - *The Manufacture recommends that this part be installed by a licensed contractor.

Manufacturer #36J22-214

Universal Gas Valve - *The Manufacture recommends that this part be installed by a licensed contractor.

Manufacturer #36C03-433

Universal Nitride igniter upgrade kit

Manufacturer #21D64002

Includes Nitride Ignitor with 15.5" Leads One Universal” Mounting Bracket and Screw Mounting Adaptor Bracket 2 Ceramic Wire Nuts Updated Manufacturer Cross-Reference Nitride Upgrade Furnace Label Instruction Booklet

Hot Surface Ignitor with 1-3/8" leads, 270°C Mounting Block, Cylinder Base, Insulation 200°C, 1/4" Spade Terminals, Includes Ceramic Wire Nuts. Replaces R/S 41-413

Manufacturer #767A-375

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Universal, single stage, fast open, gas valve - *The Manufacture recommends that this part be installed by a licensed contractor.

Manufacturer #36H32-423

Universal, single stage, slow open, gas valve - *The Manufacture recommends that this part be installed by a licensed contractor.

Manufacturer #36H33-412

Gas Valve kit - *The Manufacture recommends that this part be installed by a licensed contractor.

Manufacturer #36J54-214

Gas Valve *The Manufacture recommends that this part be installed by a licensed contractor.

Manufacturer #36C03-300

Universal Gas Valve - *The Manufacture recommends that this part be installed by a licensed contractor.

Manufacturer #36C03-333

Gas Valve - *The Manufacture recommends that this part be installed by a licensed contractor.

Manufacturer #36C94-303

Silicon Nitride 80v Hot Surface Ignitor, With White Teflon Coated Leads, 2 Terminal Amp Receptacle With .084" Female Socket, Must Be Used With Hot Surface Ignition for Residential Furnaces (Silicon Nitride Replacement Only) , Replaces Thermo 768A-143 (380650)

Manufacturer #768A-843S1

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Hot Surface Ignitor With 5-1/4" Leads, N Style Mounting Block, Left Tab, Insulation 200°C, Electrical Connection, Molex Side Lock Connector with .092” Male Pins, Connector with Mounting Adaptor, Replaces R/S 41-411

Manufacturer #767A-383

If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.