GE Washing Machine Parts

Washing machine agitator assembly.

OEM Part - Manufacturer #WH43X10034

Agitator lifts straight up and off the plastic drive bell with a firm pull.

Washing machine main tub seal. If the washer leaks around the center shaft then the main tub seal is likely defective.

OEM Part - Manufacturer #WH02X10383

If your washer has an unpleasant odor than we recommend using Affresh washing machine cleaner.

Control knob, white

OEM Part - Manufacturer #WH1X2721

External hose drain

OEM Part - Manufacturer #WH41X10096

If your washing machine has a moldy or musty odor, we recommend cleaning it with Affresh washing machine cleaner.

Washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle. If the drain pump is clogged, damaged, or defective, the washer won't drain properly.

OEM Part - Manufacturer #WH23X10030

If your washing machine has a moldy or musty odor, we recommend cleaning it with Affresh washing machine cleaner.

Washing machine main tub bearing. Located at bottom of outer tub. The tub bearing helps to keep the inner tub spinning smoothly.

OEM Part - Manufacturer #WH2X1198

Washing machine agitator drive bell (also called the coupler). The drive bell connects the transmission drive shaft to the agitator base.

OEM Part - Manufacturer #WH49X10042

If your washing machine has a moldy or musty odor, we recommend cleaning it with Affresh washing machine cleaner.

The Genuine OEM GE Appliances Drive Belt WH1X2026 connects the drive motor to the washer's drive system to spin the basket. It is a high-quality, black, V-shaped belt that measures 29 1/2 inches by 1/2 inch. Disconnecting the appliance from all utilities is recommended before installation.

OEM Part - Manufacturer #WH1X2026

The GE OEM WH2X1193 Hub Nut is a durable and reliable part for General Electric washing machines. It is 1 11/16 inches in size and has a backwards thread. A Spanner Wrench is recommended for installation and removal.

OEM Part - Manufacturer #WH2X1193

This tub nut wrench will help you easily remove the tub nut.

The GE Appliances Water Inlet Valve controls water flow into the washer and is also known as the Water Inlet Valve Assembly. It is recommended to disconnect the appliance before installation.

OEM Part - Manufacturer #WH13X10024

Split ring bushing at outer tub

OEM Part - Manufacturer #WH02X10265

Hose from outer tub to the drain pump

OEM Part - Manufacturer #WH41X22935

Knob clip, also called an insert. If the clip is missing from the knob check on the control stem.

OEM Part - Manufacturer #WH01X10106